[VMETER-1] $0.50 each
Volume Meter (32 meters are available)
This is a volume adjustment meter.
The meter is logrithmic (like a VU meter).
The meter is full scale at 3.0 volts.
The meter resistance is 300 ohms.
The meter moves from right to left (full scale at left side of the meter).
The scale reads left to right in green letters "1" to "9".
The green text "TUNE TO MAXIMUM" appears above the center of the scale.
The meter is 2.5 inches square.
There are two mount holes on the sides for #4 screws.
The meter can be front mounted through a panel through a 2 inch diameter hole.
Alternately it can be mount through the back of the panel either through a 2.125 inch square hole, or by mounting it through a bezel hole. It has a bezel insert hole area of 1.75 inches wide by 1/2 inches high by 3/16 inches deep.
There is a hole in the back covered by tape. The tape can be removed to allow back-lighting of the meter.
These meters are NOS (unused).
This part is sold as is (no return).
Shipping and Handling Information